● High efficiency motor connects directly to the impeller for the best energy savings.
● Strong material and construction, double mechanical seal, epoxy resin cable entry, IP68 waterproof.
● Shaft and impeller has been precisely balanced for a quiet and long life performance.
● Standard protection is miniature thermal protector and mechanical seal leakage detector. Optional protection devices available.
● The 3D computerized impeller and vanes conductive design, creates a higher pump efficiency.
● Sacrificial Anode : Sacrificial Anodes are highly active metals that are used to prevent a less active material surface from corroding. Sacrificial Anode reduces the rusting corrosion in sea water and increase the lifetime of the pump.
● Strong material and construction, double mechanical seal, epoxy resin cable entry, IP68 waterproof.
● Shaft and impeller has been precisely balanced for a quiet and long life performance.
● Standard protection is miniature thermal protector and mechanical seal leakage detector. Optional protection devices available.
● The 3D computerized impeller and vanes conductive design, creates a higher pump efficiency.
● Sacrificial Anode : Sacrificial Anodes are highly active metals that are used to prevent a less active material surface from corroding. Sacrificial Anode reduces the rusting corrosion in sea water and increase the lifetime of the pump.
| Item | Description | |
|---|---|---|
|
Limits of Use |
Liquid Temp. | 0~40°C (32~104°F) |
| Applications |
Wastewater • Industry drainage • Agriculture irrigation • Aquaculture water |
|
| Type | Frequency | 50Hz / 60Hz |
| Motor |
50Hz/8P (750rpm : 50~60HP) • 50Hz/10P (600rpm : 75~100HP) • 60Hz/10P (720rpm : 50~60HP) • 60Hz/12P (600rpm : 75~100HP) • Dry Motor |
|
| Insulation | Clase H | |
| Protection | IP68 | |
| Protector | MTS • MS | |
| Bearing | Ball Type | |
| M.seal | Double M.seals | |
| Impeller | Axial | |
| Material | Upper Cover | FC200 |
| Motor Frame | FC200 | |
| Shaft End | SUS420J2 | |
| M.seal | SiC/SiC & SiC/SiC | |
| Casing | FC200 | |
| Impeller | SCS13 | |
| Cable | VCT or PNCT or H07RN-F | |
| Wearing ring | SCS13(50~60HP) • ALBC3(75~100HP) | |
|
Base stand / Outer cover |
SS400 (Stand type) | |
| Optional |
Discharge and flange can be made to custom specification. |
|
● Water supply or drainage for industrial.
● Water supply for cooling in the power plant.
● Drainage of waste water treatment.
● Used fot large volume dewatering.
● Water supply for agriculture irrigation.
● Others：Extraction of water from dock and river.
● Water supply for cooling in the power plant.
● Drainage of waste water treatment.
● Used fot large volume dewatering.
● Water supply for agriculture irrigation.
● Others：Extraction of water from dock and river.
